# BR-S-08: Bemessungsgrundlage S falsch

Source: https://veriport.io/de/e-rechnung-regeln/br-s-08 (published 2026-11-17)

In der Steueraufschlüsselung der Kategorie S zu einem Satz muss die Bemessungsgrundlage (BT-116) der Summe der Positionsnettobeträge (BT-131) plus Zuschläge minus Nachlässe auf Dokumentebene dieser Kategorie und dieses Satzes entsprechen. Unten: die Meldung, Ursache und Lösung, und eine von unserem Validator geprüfte Beispielrechnung.

- **Spezifikation:** [Geschäftsregeln der EN 16931](/de/e-rechnung-regeln/en16931), CEN EN 16931 validation artefacts 1.3.16
- **Schwere:** Fehler
- **Geschäftsbegriffe:** BT-92, BT-95, BT-96, BT-99, BT-102, BT-103, BT-116, BT-118 …
- **Gemeldet von** `POST /einvoice/validate` und unseren kostenlosen Prüfern, mit Verweis auf diese Seite

## Die Meldung des Validators

BR-S-08 ist eine Regel der Geschäftsregeln der EN 16931 (CEN-Validierungsartefakte 1.3.16) für UBL und CII. Sie ist ein Fehler (fatal): ein Validator weist die Rechnung zurück.

```text
[BR-S-08]-For each different value of VAT category rate (BT-119) where the VAT category code (BT-118) is "Standard rated", the VAT category taxable amount (BT-116) in a VAT breakdown (BG-23) shall equal the sum of Invoice line net amounts (BT-131) plus the sum of document level charge amounts (BT-99) minus the sum of document level allowance amounts (BT-92) where the VAT category code (BT-151, BT-102, BT-95) is "Standard rated" and the VAT rate (BT-152, BT-103, BT-96) equals the VAT category rate (BT-119).
```

## Was die Regel prüft

In der Steueraufschlüsselung der Kategorie S zu einem Satz muss die Bemessungsgrundlage (BT-116) der Summe der Positionsnettobeträge (BT-131) plus Zuschläge minus Nachlässe auf Dokumentebene dieser Kategorie und dieses Satzes entsprechen.

## Warum Rechnungen daran scheitern

Ein Nachlass oder Zuschlag fehlt in der Aufschlüsselung, eine Position ist dem falschen Satz zugeordnet, oder die Grundlage wird aus ungerundeten Positionsbeträgen gebildet.

## So beheben Sie den Fehler

Die Bemessungsgrundlage jeder Aufschlüsselung aus den Beträgen der Datei neu berechnen: Positionen + Zuschläge − Nachlässe der Kategorie S zu diesem Satz.

## Eine fehlerhafte Rechnung und ihre Korrektur, geprüft

Ausgangspunkt ist unsere Musterrechnung (zwei Positionen zu 19 %, Berlin nach Stuttgart), von unserer eigenen Erzeugung als EN 16931 in UBL geschrieben. Die Änderung unten (mit `-` die fehlerhafte Fassung, mit `+` die korrigierte) lässt die Regel scheitern. Beide Fassungen liefen am 2026-11-17 durch unseren Validator (XML-Schema und die offiziellen Regeldateien, wie `POST /einvoice/validate` sie anwendet): die korrigierte ist gültig, die fehlerhafte meldet BR-S-08 und 2 weitere Regeln, wie es eine echte Datei mit diesem Fehler täte.

| Regel | Schwere | Stelle | Meldung |
|---|---|---|---|
| [BR-CO-17](/de/e-rechnung-regeln/br-co-17) | Fehler | `/ubl:Invoice/cac:TaxTotal/cac:TaxSubtotal` | VAT category tax amount (BT-117) = VAT category taxable amount (BT-116) x (VAT category rate (BT-119) / 100), rounded to two decimals. |
| **BR-S-08** | Fehler | `/ubl:Invoice/cac:TaxTotal/cac:TaxSubtotal/cac:TaxCategory` | For each different value of VAT category rate (BT-119) where the VAT category code (BT-118) is "Standard rated", the VAT category taxable amount (BT-116) in a VAT breakdown (BG-23) shall equal the sum of Invoice line net amounts (BT-131) plus the sum of document level charge amounts (BT-99) minus the sum of document level allowance amounts (BT-92) where the VAT category code (BT-151, BT-102, BT-95) is "Standard rated" and the VAT rate (BT-152, BT-103, BT-96) equals the VAT category rate (BT-119). |
| [BR-S-09](/de/e-rechnung-regeln/br-s-09) | Fehler | `/ubl:Invoice/cac:TaxTotal/cac:TaxSubtotal/cac:TaxCategory` | The VAT category tax amount (BT-117) in a VAT breakdown (BG-23) where VAT category code (BT-118) is "Standard rated" shall equal the VAT category taxable amount (BT-116) multiplied by the VAT category rate (BT-119). |

```diff
  …
      <cbc:TaxAmount currencyID="EUR">438.60</cbc:TaxAmount>
      <cac:TaxSubtotal>
-       <cbc:TaxableAmount currencyID="EUR">2408.40</cbc:TaxableAmount>
+       <cbc:TaxableAmount currencyID="EUR">2308.40</cbc:TaxableAmount>
        <cbc:TaxAmount currencyID="EUR">438.60</cbc:TaxAmount>
        <cac:TaxCategory>
  …
```

## Die Regel im Wortlaut

Wo die Regel ansetzt (`context`) und was gelten muss (`test`), unverändert aus CEN EN 16931 validation artefacts 1.3.16. Ein `assert` schlägt fehl, wenn sein Test falsch ist.

Wortlaut und Prüfung: © CEN/TC 434, EN-16931-Validierungsartefakte, EUPL 1.2. Zitiert ohne Änderung; die Erklärungen auf dieser Seite sind von Veriport.

```xpath
context: /*/cac:TaxTotal/cac:TaxSubtotal/cac:TaxCategory[normalize-space(cbc:ID) = 'S'][cac:TaxScheme/normalize-space(upper-case(cbc:ID))='VAT']
test:    every $rate in xs:decimal(cbc:Percent) satisfies (((exists(//cac:InvoiceLine[cac:Item/cac:ClassifiedTaxCategory/normalize-space(cbc:ID) = 'S'][cac:Item/cac:ClassifiedTaxCategory/xs:decimal(cbc:Percent) =$rate]) or exists(//cac:AllowanceCharge[cac:TaxCategory/normalize-space(cbc:ID)='S'][cac:TaxCategory/xs:decimal(cbc:Percent) = $rate])) and ((../xs:decimal(cbc:TaxableAmount - 1) < (sum(../../../cac:InvoiceLine[cac:Item/cac:ClassifiedTaxCategory/normalize-space(cbc:ID)='S'][cac:Item/cac:ClassifiedTaxCategory/xs:decimal(cbc:Percent) =$rate]/xs:decimal(cbc:LineExtensionAmount)) + sum(../../../cac:AllowanceCharge[cbc:ChargeIndicator=true()][cac:TaxCategory/normalize-space(cbc:ID)='S'][cac:TaxCategory/xs:decimal(cbc:Percent) = $rate]/xs:decimal(cbc:Amount)) - sum(../../../cac:AllowanceCharge[cbc:ChargeIndicator=false()][cac:TaxCategory/normalize-space(cbc:ID)='S'][cac:TaxCategory/xs:decimal(cbc:Percent) = $rate]/xs:decimal(cbc:Amount)))) and (../xs:decimal(cbc:TaxableAmount + 1) > (sum(../../../cac:InvoiceLine[cac:Item/cac:ClassifiedTaxCategory/normalize-space(cbc:ID)='S'][cac:Item/cac:ClassifiedTaxCategory/xs:decimal(cbc:Percent) =$rate]/xs:decimal(cbc:LineExtensionAmount)) + sum(../../../cac:AllowanceCharge[cbc:ChargeIndicator=true()][cac:TaxCategory/normalize-space(cbc:ID)='S'][cac:TaxCategory/xs:decimal(cbc:Percent) = $rate]/xs:decimal(cbc:Amount)) - sum(../../../cac:AllowanceCharge[cbc:ChargeIndicator=false()][cac:TaxCategory/normalize-space(cbc:ID)='S'][cac:TaxCategory/xs:decimal(cbc:Percent) = $rate]/xs:decimal(cbc:Amount)))))) or (exists(//cac:CreditNoteLine[cac:Item/cac:ClassifiedTaxCategory/normalize-space(cbc:ID) = 'S'][cac:Item/cac:ClassifiedTaxCategory/xs:decimal(cbc:Percent) =$rate]) or exists(//cac:AllowanceCharge[cac:TaxCategory/normalize-space(cbc:ID)='S'][cac:TaxCategory/xs:decimal(cbc:Percent) = $rate])) and ((../xs:decimal(cbc:TaxableAmount - 1) < (sum(../../../cac:CreditNoteLine[cac:Item/cac:ClassifiedTaxCategory/normalize-space(cbc:ID)='S'][cac:Item/cac:ClassifiedTaxCategory/xs:decimal(cbc:Percent) =$rate]/xs:decimal(cbc:LineExtensionAmount)) + sum(../../../cac:AllowanceCharge[cbc:ChargeIndicator=true()][cac:TaxCategory/normalize-space(cbc:ID)='S'][cac:TaxCategory/xs:decimal(cbc:Percent) = $rate]/xs:decimal(cbc:Amount)) - sum(../../../cac:AllowanceCharge[cbc:ChargeIndicator=false()][cac:TaxCategory/normalize-space(cbc:ID)='S'][cac:TaxCategory/xs:decimal(cbc:Percent) = $rate]/xs:decimal(cbc:Amount)))) and (../xs:decimal(cbc:TaxableAmount + 1) > (sum(../../../cac:CreditNoteLine[cac:Item/cac:ClassifiedTaxCategory/normalize-space(cbc:ID)='S'][cac:Item/cac:ClassifiedTaxCategory/xs:decimal(cbc:Percent) =$rate]/xs:decimal(cbc:LineExtensionAmount)) + sum(../../../cac:AllowanceCharge[cbc:ChargeIndicator=true()][cac:TaxCategory/normalize-space(cbc:ID)='S'][cac:TaxCategory/xs:decimal(cbc:Percent) = $rate]/xs:decimal(cbc:Amount)) - sum(../../../cac:AllowanceCharge[cbc:ChargeIndicator=false()][cac:TaxCategory/normalize-space(cbc:ID)='S'][cac:TaxCategory/xs:decimal(cbc:Percent) = $rate]/xs:decimal(cbc:Amount))))))
```

```xpath
context: //ram:ApplicableHeaderTradeSettlement/ram:ApplicableTradeTax/ram:CategoryCode[.='S']
test:    every $rate in ../ram:RateApplicablePercent/xs:decimal(.) satisfies (../ram:BasisAmount = (round(sum(/rsm:CrossIndustryInvoice/rsm:SupplyChainTradeTransaction/ram:IncludedSupplyChainTradeLineItem/ram:SpecifiedLineTradeSettlement[ram:ApplicableTradeTax/ram:CategoryCode = 'S' and ram:ApplicableTradeTax/xs:decimal(ram:RateApplicablePercent) =$rate]/ram:SpecifiedTradeSettlementLineMonetarySummation/xs:decimal(ram:LineTotalAmount)) * 10 * 10) div 100 + round(sum(/rsm:CrossIndustryInvoice/rsm:SupplyChainTradeTransaction/ram:ApplicableHeaderTradeSettlement/ram:SpecifiedTradeAllowanceCharge[ram:ChargeIndicator/udt:Indicator=true() and ram:CategoryTradeTax/ram:CategoryCode='S' and ram:CategoryTradeTax/xs:decimal(ram:RateApplicablePercent)=$rate]/xs:decimal(ram:ActualAmount[1])) * 10 * 10) div 100 - round(sum(/rsm:CrossIndustryInvoice/rsm:SupplyChainTradeTransaction/ram:ApplicableHeaderTradeSettlement/ram:SpecifiedTradeAllowanceCharge[ram:ChargeIndicator/udt:Indicator=false() and ram:CategoryTradeTax/ram:CategoryCode='S' and ram:CategoryTradeTax/xs:decimal(ram:RateApplicablePercent)=$rate]/xs:decimal(ram:ActualAmount[1])) * 10 * 10) div 100))
```

## Eigene Rechnung prüfen

Laden Sie Ihre XRechnung, ZUGFeRD- oder Peppol-Datei im kostenlosen [XRechnung-Prüfer](/tools/xrechnung-pruefen) hoch: er wendet dieselben Regeldateien an und verlinkt bei jedem Befund die Seite der Regel. Für Ihre Software: `POST /einvoice/validate` ([Referenz](/docs/einvoice)) liefert dieselbe Prüfung als JSON, jeder Befund mit dem Feld `explanation`, das auf diese Seiten zeigt (5 Aufrufe je Prüfung, ohne Schlüssel im Tageskontingent).

## Read next

- [BR-S-06: Falscher Steuersatz bei S (Nachlass)](https://veriport.io/de/e-rechnung-regeln/br-s-06)
- [BR-S-07: Falscher Steuersatz bei S (Zuschlag)](https://veriport.io/de/e-rechnung-regeln/br-s-07)
- [BR-S-09: Steuerbetrag S ≠ Grundlage × Satz](https://veriport.io/de/e-rechnung-regeln/br-s-09)
- [BR-S-10: Befreiungsgrund bei Kategorie S](https://veriport.io/de/e-rechnung-regeln/br-s-10)
- [BR-45: Steuerbemessungsgrundlage (BT-116) fehlt](https://veriport.io/de/e-rechnung-regeln/br-45)
- [BR-47: Kategorie der Steueraufschlüsselung (BT-118) fehlt](https://veriport.io/de/e-rechnung-regeln/br-47)
- [Alle Geschäftsregeln der EN 16931](https://veriport.io/de/e-rechnung-regeln/en16931)
- [Alle Prüfregeln, Suche](https://veriport.io/de/e-rechnung-regeln)
- [XRechnung kostenlos prüfen](https://veriport.io/tools/xrechnung-pruefen)
- [E-Rechnung kostenlos erstellen](https://veriport.io/tools/e-rechnung-erstellen)

## Sources

- EN 16931 validation artefacts 1.3.16 (UBL and CII schematron, the business rules BR-*) — https://github.com/ConnectingEurope/eInvoicing-EN16931/releases/tag/validation-1.3.16 (2026-10-28)
- EN 16931 validation artefacts: licence, European Union Public Licence (EUPL) v1.2 (LICENSE.txt, the README « License » section and the release notes of validation-1.3.16) — https://github.com/ConnectingEurope/eInvoicing-EN16931/blob/master/LICENSE.txt (2026-11-17)
