BR-G-01: No VAT breakdown for category G

When a line, an allowance or a charge uses category G (« Export outside the EU »), an exempt export of goods to a destination outside the EU, the VAT breakdown (BG-23) must contain exactly one breakdown with category G; and a G breakdown needs something in that category to break down. Below: the message, the cause and the fix, and an invoice our validator checked, failing and fixed.

The message validators print

BR-G-01 is a rule of the EN 16931 business rules (CEN validation artefacts 1.3.16) for UBL and CII. It is an error (fatal): a validator rejects the invoice.

UBL and CII
[BR-G-01]-An Invoice that contains an Invoice line (BG-25), a Document level allowance (BG-20) or a Document level charge (BG-21) where the VAT category code (BT-151, BT-95 or BT-102) is "Export outside the EU" shall contain in the VAT breakdown (BG-23) exactly one VAT category code (BT-118) equal with "Export outside the EU".

What it checks

When a line, an allowance or a charge uses category G (« Export outside the EU »), an exempt export of goods to a destination outside the EU, the VAT breakdown (BG-23) must contain exactly one breakdown with category G; and a G breakdown needs something in that category to break down.

Why invoices fail it

The breakdown is built from a fixed list of rates rather than from the categories the lines actually use, or a line was changed to G after the totals were computed.

How to fix it

Build the VAT breakdown from the lines, allowances and charges: one group per category, with category G for these amounts.

A failing invoice and its fix, checked

We start from our sample invoice (two lines at 19 %, Berlin to Stuttgart), written by our own generator as EN 16931 in UBL. The change below (- the failing version, + the fixed one) makes the rule fail. Both versions went through our validator on 2026-11-17 (the XML schema and the official rule files, as POST /einvoice/validate runs them): the fixed one is valid, the failing one reports BR-G-01 and 1 other rule, as a real file with this mistake would.

RuleSeverityWhereMessage
BR-CO-18error/ubl:InvoiceAn Invoice shall at least have one VAT breakdown group (BG-23).
BR-G-01error/ubl:InvoiceAn Invoice that contains an Invoice line (BG-25), a Document level allowance (BG-20) or a Document level charge (BG-21) where the VAT category code (BT-151, BT-95 or BT-102) is "Export outside the EU" shall contain in the VAT breakdown (BG-23) exactly one VAT category code (BT-118) equal with "Export outside the EU".
UBL: failing (-) → fixed (+)
  …
    <cac:TaxTotal>
      <cbc:TaxAmount currencyID="EUR">0.00</cbc:TaxAmount>
+     <cac:TaxSubtotal>
+       <cbc:TaxableAmount currencyID="EUR">2408.40</cbc:TaxableAmount>
+       <cbc:TaxAmount currencyID="EUR">0.00</cbc:TaxAmount>
+       <cac:TaxCategory>
+         <cbc:ID>G</cbc:ID>
+         <cbc:Percent>0.00</cbc:Percent>
+         <cbc:TaxExemptionReasonCode>VATEX-EU-G</cbc:TaxExemptionReasonCode>
+         <cac:TaxScheme>
+           <cbc:ID>VAT</cbc:ID>
+         </cac:TaxScheme>
+       </cac:TaxCategory>
+     </cac:TaxSubtotal>
    </cac:TaxTotal>
    <cac:LegalMonetaryTotal>
  …

The rule as published

Where the rule applies (context) and what must hold (test), unmodified from CEN EN 16931 validation artefacts 1.3.16. An assert fails when its test is false.

Text and test: © CEN/TC 434, EN 16931 validation artefacts, EUPL 1.2. Quoted unmodified; the explanations on this page are Veriport’s.

UBL · CEN EN 16931 validation artefacts (UBL) 1.3.16 · assert · error
context: /ubl:Invoice | /cn:CreditNote
test:    ((exists(//cac:TaxCategory[cac:TaxScheme/normalize-space(upper-case(cbc:ID))='VAT']/cbc:ID[normalize-space(.) = 'G']) or exists(//cac:ClassifiedTaxCategory[cac:TaxScheme/normalize-space(upper-case(cbc:ID))='VAT']/cbc:ID[normalize-space(.) = 'G'])) and (count(cac:TaxTotal/cac:TaxSubtotal/cac:TaxCategory[cac:TaxScheme/normalize-space(upper-case(cbc:ID))='VAT']/cbc:ID[normalize-space(.) = 'G']) = 1)) or (not(//cac:TaxCategory[cac:TaxScheme/normalize-space(upper-case(cbc:ID))='VAT']/cbc:ID[normalize-space(.) = 'G']) and not(//cac:ClassifiedTaxCategory[cac:TaxScheme/normalize-space(upper-case(cbc:ID))='VAT']/cbc:ID[normalize-space(.) = 'G']))
CII · CEN EN 16931 validation artefacts (CII) 1.3.16 · assert · error
context: /rsm:CrossIndustryInvoice
test:    (count(//ram:ApplicableHeaderTradeSettlement/ram:ApplicableTradeTax[ram:CategoryCode='G'])=0 and count(//ram:SpecifiedLineTradeSettlement/ram:ApplicableTradeTax[ram:CategoryCode='G'])=0 and count(//ram:CategoryTradeTax[ram:CategoryCode='G'])=0) or ( count(//ram:ApplicableHeaderTradeSettlement/ram:ApplicableTradeTax[ram:CategoryCode='G'])=1 and (exists(//ram:SpecifiedLineTradeSettlement/ram:ApplicableTradeTax[ram:CategoryCode='G']) or exists(//ram:CategoryTradeTax[ram:CategoryCode='G'])))

Check your own invoice

Drop your XRechnung, ZUGFeRD or Peppol file into a free validator (Peppol BIS, XRechnung, Factur-X): each runs the same rule files and links every finding to its rule page. From your own code, POST /einvoice/validate (reference) returns the same check as JSON, each finding with an explanation field pointing here (5 calls a check, anonymous within the daily allowance).

The whole failing invoice (UBL)
BR-G-01-failing.xml
<?xml version="1.0" encoding="UTF-8"?>
<ubl:Invoice xmlns:ubl="urn:oasis:names:specification:ubl:schema:xsd:Invoice-2" xmlns:cac="urn:oasis:names:specification:ubl:schema:xsd:CommonAggregateComponents-2" xmlns:cbc="urn:oasis:names:specification:ubl:schema:xsd:CommonBasicComponents-2">
  <cbc:CustomizationID>urn:cen.eu:en16931:2017</cbc:CustomizationID>
  <cbc:ProfileID>urn:fdc:peppol.eu:2017:poacc:billing:01:1.0</cbc:ProfileID>
  <cbc:ID>2026-017</cbc:ID>
  <cbc:IssueDate>2026-10-20</cbc:IssueDate>
  <cbc:DueDate>2026-11-03</cbc:DueDate>
  <cbc:InvoiceTypeCode>380</cbc:InvoiceTypeCode>
  <cbc:DocumentCurrencyCode>EUR</cbc:DocumentCurrencyCode>
  <cbc:BuyerReference>EK-2026-0345</cbc:BuyerReference>
  <cac:AccountingSupplierParty>
    <cac:Party>
      <cbc:EndpointID schemeID="EM">rechnung@hartmann-webdesign.example</cbc:EndpointID>
      <cac:PostalAddress>
        <cbc:StreetName>Lindenstraße 14</cbc:StreetName>
        <cbc:CityName>Berlin</cbc:CityName>
        <cbc:PostalZone>10969</cbc:PostalZone>
        <cac:Country>
          <cbc:IdentificationCode>DE</cbc:IdentificationCode>
        </cac:Country>
      </cac:PostalAddress>
      <cac:PartyTaxScheme>
        <cbc:CompanyID>DE136695976</cbc:CompanyID>
        <cac:TaxScheme>
          <cbc:ID>VAT</cbc:ID>
        </cac:TaxScheme>
      </cac:PartyTaxScheme>
      <cac:PartyLegalEntity>
        <cbc:RegistrationName>Lena Hartmann — Webdesign</cbc:RegistrationName>
      </cac:PartyLegalEntity>
      <cac:Contact>
        <cbc:Name>Lena Hartmann</cbc:Name>
        <cbc:Telephone>+49 30 1234567</cbc:Telephone>
        <cbc:ElectronicMail>rechnung@hartmann-webdesign.example</cbc:ElectronicMail>
      </cac:Contact>
    </cac:Party>
  </cac:AccountingSupplierParty>
  <cac:AccountingCustomerParty>
    <cac:Party>
      <cbc:EndpointID schemeID="EM">buchhaltung@mustermann.example</cbc:EndpointID>
      <cac:PostalAddress>
        <cbc:StreetName>Industrieweg 7</cbc:StreetName>
        <cbc:CityName>Zürich</cbc:CityName>
        <cbc:PostalZone>8001</cbc:PostalZone>
        <cac:Country>
          <cbc:IdentificationCode>CH</cbc:IdentificationCode>
        </cac:Country>
      </cac:PostalAddress>
      <cac:PartyLegalEntity>
        <cbc:RegistrationName>Mustermann Maschinenbau GmbH</cbc:RegistrationName>
      </cac:PartyLegalEntity>
      <cac:Contact>
        <cbc:ElectronicMail>buchhaltung@mustermann.example</cbc:ElectronicMail>
      </cac:Contact>
    </cac:Party>
  </cac:AccountingCustomerParty>
  <cac:Delivery>
    <cbc:ActualDeliveryDate>2026-10-15</cbc:ActualDeliveryDate>
  </cac:Delivery>
  <cac:PaymentMeans>
    <cbc:PaymentMeansCode>58</cbc:PaymentMeansCode>
    <cac:PayeeFinancialAccount>
      <cbc:ID>DE02120300000000202051</cbc:ID>
    </cac:PayeeFinancialAccount>
  </cac:PaymentMeans>
  <cac:TaxTotal>
    <cbc:TaxAmount currencyID="EUR">0.00</cbc:TaxAmount>
  </cac:TaxTotal>
  <cac:LegalMonetaryTotal>
    <cbc:LineExtensionAmount currencyID="EUR">2408.40</cbc:LineExtensionAmount>
    <cbc:TaxExclusiveAmount currencyID="EUR">2408.40</cbc:TaxExclusiveAmount>
    <cbc:TaxInclusiveAmount currencyID="EUR">2408.40</cbc:TaxInclusiveAmount>
    <cbc:PayableAmount currencyID="EUR">2408.40</cbc:PayableAmount>
  </cac:LegalMonetaryTotal>
  <cac:InvoiceLine>
    <cbc:ID>1</cbc:ID>
    <cbc:InvoicedQuantity unitCode="HUR">24.00</cbc:InvoicedQuantity>
    <cbc:LineExtensionAmount currencyID="EUR">2280.00</cbc:LineExtensionAmount>
    <cac:Item>
      <cbc:Name>Relaunch Website, Konzeption und Umsetzung</cbc:Name>
      <cac:ClassifiedTaxCategory>
        <cbc:ID>G</cbc:ID>
        <cbc:Percent>0.00</cbc:Percent>
        <cac:TaxScheme>
          <cbc:ID>VAT</cbc:ID>
        </cac:TaxScheme>
      </cac:ClassifiedTaxCategory>
    </cac:Item>
    <cac:Price>
      <cbc:PriceAmount currencyID="EUR">95.00</cbc:PriceAmount>
    </cac:Price>
  </cac:InvoiceLine>
  <cac:InvoiceLine>
    <cbc:ID>2</cbc:ID>
    <cbc:InvoicedQuantity unitCode="C62">1.00</cbc:InvoicedQuantity>
    <cbc:LineExtensionAmount currencyID="EUR">128.40</cbc:LineExtensionAmount>
    <cac:Item>
      <cbc:Name>Lizenz Bildmaterial</cbc:Name>
      <cac:ClassifiedTaxCategory>
        <cbc:ID>G</cbc:ID>
        <cbc:Percent>0.00</cbc:Percent>
        <cac:TaxScheme>
          <cbc:ID>VAT</cbc:ID>
        </cac:TaxScheme>
      </cac:ClassifiedTaxCategory>
    </cac:Item>
    <cac:Price>
      <cbc:PriceAmount currencyID="EUR">128.40</cbc:PriceAmount>
    </cac:Price>
  </cac:InvoiceLine>
</ubl:Invoice>

Sources